Home


 

UPDATED September 29, 2009

The Treasures page contains items that are exclusive to The Armoury, or those items that have been in stock for a long time; or otherwise do not fit into other categorizes. I will try to keep the prices on items on the treasures page at a clearance level. This page will be updated from time to time so be sure to check back often. If anyone has any questions regarding items on the Treasures Page, just drop me a note.
 

  XH1074 -- Hero’s Axe

The legendary double axe has long been associated with heroes and heroics, and the Hero’s Axe perpetuates the legend. Almost 30” overall with 10” polished edges, fearsome but with graceful lines and studded decoration, this axe is the ultimate combination of form and function. Leather edge covers for the tempered edges are provided for safe portability.
 

Stats

Blade length:  8 3/4“
Handle length:   26 1/2
Overall length:  30“
Weight:  4lbs
Thickness at Guard:  .240

XH1074 Hero's Axe $135
 

 

  XH1072 Viking Axe

The CAS/Hanwei Viking Axe features a forged head with a sharp tempered edge and hardwood shaft. The shaft is approximately 30 ½” long.
 

Stats

Overall length:  35“
Weight:  4lbs 8oz
Thickness at Guard:  .82

XH1072 Viking Axe $75

 

  XH1073 Bearded Axe

The Bearded Axe is a  typical pattern, capable of cleaving helms or amour with impunity. The axe features a forged head with a sharp tempered edge and hardwood shaft. The shaft is approximately 30 ½” long.
 

Stats

Overall length:  30 1/2“
Weight:  4lbs 6oz
Thickness at Guard:  .57“
 

XH1073 Bearded Axe $75

 

  XH2099 Danish War Axe

The Danish Axe is undoubtedly a fine example of the use of peacetime agricultural tools as weapons in time of war. Equally at home felling trees or adversaries, the axe evokes a fearsome picture of the woodsman at war.

Stats


Blade length:  9 Ό”
Overall length:  39 ½”
Weight:  6lb 2oz
 

XH2099 Danish War Axe $85

 

  Kris swords are believed to have originated in the 13th century on the island of Java in the Indonesian archipelago, and migrated to the Philippines, Malaysia, and various Southeast Asian countries. The kris sword is very distinct in appearance with various shapes and sizes. The blade may either be straight or wavy or a combination. The kris blade widens near the handle with sharp pointed protrusions, which act as a guard against an opponent. Typically, Filipino kris swords are larger and heavier than their Indonesian counterpart. When used in combat the kris sword is primarily a slashing weapon but has dynamic thrusting power. Our kris swords are handmade in the Philippines in various shapes and sizes and are constructed with L6 high carbon blades. The kris sword is an integral part of Filipino culture, history, and tradition. (SR527) is a set of sword and dagger.

SR527 Kris Sword

Specifications:

Overall: 28 Ύ"

Blade: 22 ½"

Handle: 6 Ό"

Handle Material: Mahogany

Thickness: .13"

Weight: 1lb

 

SR527 Kris Dagger

Specifications:

Overall: 11 Ό"

Blade: 7"

Handle: 4 ½"

Handle Material: Mahogany

Thickness: .13"

Weight: 3oz

SR527 Kris Sword and Dagger Set $180

 

 

The Pinute is a Filipino sword, which is long, straight, and well balanced. The (SR526) is a set of sword and dagger. It is a variation of the agricultural bolo machete and is a popular sword of the Visayan warriors of Cebu. The Visayan warriors considered a blade that had been cleaned and whitened ready for war. The design and functionality of the Filipino pinute shows a definite Spanish influence on Filipino weaponry. One major characteristic of the pinute is that the top of the blade is sharpened from the tip down the spine. These pinutes are handcrafted in the Philippines and constructed with L6 high-carbon steel blades. All the pinutes come with an intricate Abaca tree cord-wrapped scabbard.

SR526 Pinuti Sword

Specifications:

Overall: 32 ½”

Blade: 25 Ό”

Handle: 6 ½”

Handle Material: Mahogany

Thickness: .13”

Weight: 1lb 5oz

 

SR526 Pinuti Dagger

Specifications:

Overall: 14 ½”

Blade: 9”

Handle: 5 1/8”

Handle Material: Mahogany

Thickness: .11”

Weight: 6oz

SR526 Pinute Sword and Dagger Set $180

 

 

SH2067 -- Butterfly Sword Set

The CAS Hanwei Butterfly Swords Sets feature high-carbon tempered steel blades with traditional dragon engraving. The SH2067 set features leather wrapped grips and steel guards, decorated in a dragon motif. This same motif is repeated on the fittings of the double scabbard. This set includes a wall plaque for display of the swords.

Blade length:  11 1/2”
Handle length:  
Overall length:  16 1/2”
Weight:  1lb
Thickness at Guard: 
.18

SH2067 Butterfly Sword Set $125

 

 

SH2293 -- Butterfly Swords (Rattan)

The CAS Hanwei Butterfly Swords Sets feature high-carbon tempered steel blades with traditional dragon engraving. The set includes a wall plaque for display of the swords. The SH2293 set features rattan wrapped grips and solid brass guards decorated in a Lotus Flower scroll pattern, repeated on the fittings of the double scabbard, which is encased in exquisitely woven rattan.
 

Blade length:  10
Handle length:   4 1/2
Overall length:  14 3/4
Weight:  1lb
Thickness at Guard: 
.235

SH2293 Butterfly Swords (Rattan) $180

 

  CAS Iberia 026-PP Talon Dagger

The Talon Dagger is one of CAS older models that I have had in stock for a while. The dagger has a wide blade at the cross that narrows to a point. The wheel pommel and cross are brass. The dagger comes with a heavy leather scabbard.

Stats

Overall  14"

Blade  10"

 

026-PP Talon Dagger $45

The Vaciacraft items were produced in the Philippines. They come with a carbon steel blade and heavy leather scabbard. However, the swords are, to me, a little on the heavy side and are more suited as a solo-training weapon.

  Vaciacraft Knight's Dagger

The Knight's Dagger has a carbon steel blade and comes with a heavy leather scabbard. Brass pommels, cross and rings in the hardwood handle.

Stats

Overall  14"

Blade  9"

 

Knight's Dagger $45

 

  Vaciacraft Fantasy Dagger

The Fantasy Dagger has a curved steel blade and serrations on the backside of the blade. The dagger comes with a wooden scabbard; brass guard and pommel.

Stats

Overall  13 1/2"

Blade    8 3/4"

Fantasy Dagger $45

 

  Vaciacraft Bowie Knife

The Bowie Knife has a large blade and false edge near the tip. The Bowie comes with a wooden scabbard; brass guard and pommel.

Stats

Overall  14"

Blade   9"

Bowie Knife $45

 

  Vaciacraft Warsword

The Warsword has a hand-and-a-half handle that makes this large sword very maneuverable. The sword has a brass cross and pommel and rings in the hardwood handle. The sword comes with a heavy leather scabbard.

Stats

Overall  38"

Blade  27"

Weight  4lb 12oz

 

Warsword $100

 

  Vaciacraft Halfmoon Flame bladed Dagger

The Flame Bladed Dagger is a match for the Halfmoon Flame Bladed Sword. The dagger has a brass cross and pommel and it comes with a heavy leather scabbard.

Stats

Overall  17"

Blade  12"

 

Halfmoon Flame Bladed Dagger $45

 

  Vaciacraft Halfmoon Flame bladed Sword

The Halfmoon Flame Bladed Sword has a unique wave pattern to the blade. The sword has a halfmoon brass pommel and cross. The sword comes with a heavy leather scabbard.

Stats

Overall  34"

Blade   27"

Weight 3lb 10oz

 

Halfmoon Flame Bladed Sword $100

 

  Vaciacraft Flame bladed Sword

Flame Bladed Sword has a unique wave pattern to the blade. The sword has a brass pommel and cross. The sword comes with a heavy leather scabbard.

Stats

Overall  35"

Blade   27"

Weight  3lb 9oz

 

Flame Bladed Sword $100

 

  Vaciacraft Flame bladed Dagger

Flame Bladed dagger has a unique wave pattern to the blade as is a match to the Flame Bladed Sword. The sword has a brass pommel and cross. The sword comes with a wooden scabbard.

Stats

Overall  14"

Blade   9"

 

Flame Bladed Dagger $45

 

  Vaciacraft Knight's Short Sword

The Short Knight's Sword has a nicely weighted and wide blade. The sword has a brass cross and wheel pommel. The sword comes with a heavy leather scabbard.

Stats

Overall  31 1/2"

Blade    25"

Weight  4lb

 

Short Knight's Sword $100

 

  CAS Iberia 032-PP Poiter's Sword

This nice short sword is one of CAS older models that I have had in stock for a while. The sword comes with a heavy leahter scabbard, brass cross and pommel.

Stats

Overall  29 1/4"

Blade   27"

Weight  2lb 12oz

 

032-PP Poiter's Sword $175

 

  United Cutlery Silver Dragonhead katana and Wakizashi set

The swords in this set come with metal handles rendered in a dragonhead motif and with metal scabbards. The blades are stainless steel.

Stats

Katana

Overall 39"

Blade 29 1/2'

Wakizashi

Overall  27"

Blade  17 1/2"

 

Silver Katana $60

Silver Wakizashi $45

 

  United Cutlery Red Dragonhead katana and Wakizashi set

The swords in this set come with metal handles rendered in a dragonhead motif and with metal scabbards. The blades are stainless steel.

Stats

Katana

Overall 39"

Blade 29 1/2'

Wakizashi

Overall  27"

Blade  17 1/2"

 

Red Katana $60

Red Wakizashi $45

 

  UC987 United Cutlery Morgan Dagger

The Morgan Dagger is reproduced from the movie Cutthroat Island. The left-hand dagger has a large metal hand guard and pommel. The blade is stainless steel. The dagger comes with a wooden wall plaque to display the dagger. 

Stats

Overall  19"

Blade    13"

 

 

  This photos shows the hardwood handle and pommel.

 

UC987 Morgan Dagger $90

 

  CAS Iberia/Hanwei SH2261 Practical Cup-Hilt Fencing Rapier.

The fencing rapier is a match to the SH2035 Taza Cup-hilt Rapier. The rapier comes with a leather scabbard. The blade is blunted and has a flat tip for fencing. The rapier handle is wire wrapped.

Stats

Overall  44 1/2"

Blade   37"

Weight  2lb

 

SH2261 Practical Cup-Hilt Fencing Rapier $160

 

  CAS Iberia/Hanwei SH1010 Godfred Viking Sword.

I have had this Godfred Viking in stock as a display item. The sword has a nice wide fuller in the forged carbon steel blade that showed the folded steel. The same effect is seen in the steel guard and pommel. The sword comes with a wooden scabbard.

Stats

Overall  35"

Blade   28 3/4"

Weight  2lb 7oz

 

SH1010 Godfred Viking Sword $295

 

  CAS Iberia/Hanwei SH1014 Zatoichi Black Stick/Sword.

I have had this sword in stock as a display item. The straight blade is cancelled within a hardwood scabbard.

Stats

Overall  39 1/2"

Blade    28 1/2"

Weight  1lb 8oz

 

SH1014 Zatoichi Black Stick Sword $80

 

  Decorator Tai Chi Sword

This is a nice looking decorator Tai Chi Sword with a metal scabbard. The blade is stainless steel. The guard and pommel are metal and the handle is leather wrapped.

Stats

Overall  37"

Blade   27"

 

Decorator Tai Chi Sword $60

 

  007-PP Lord of the Rings Long Sword

The Lord of the Rings Sword is from CAS Iberia and comes with a heavy leather scabbard. The large cross and ring pommel are brass. The handles is hardwood with a brass ring in the center.

Stats

Overall  45 3/4"

Blade    32 3/4"

Weight  about 4lb 14oz

 

007-PP Lord of the Rings Sword $300

 

  MRL Scimitar

I have had this Scimitar from Museum Replicas for a some time. The sword has a full tang and the hardwood handle scales are attached to the tang by three pins. The sword has a brass guard. There is no scabbard for this sword.

Stats

Overall  37 1/2"

Blade    27 1/2"

Weight  3lb 4oz

MRL Scimitar $175

 

This is one of CAS/Hanwei's newest katana's. It is the SH6003SGF Musashi Shinken Katana. With a leather handle wrap. With a forged blade with hamon. This item will not be cataloged and will not be a regular stock item. I picked a couple of these katana's up and am able to offer them here.

Stats:

40" overall

11" handle

28 1/2" blade

2 lb 8 oz

Price SH6003SGF Musashi Shinken Katana $480

 

When I examined one of the SH6003SGF Musashi Shinken Katana's I noticed a tear in the leather on the handle of one of them. The arrows in the pictures shows the tear. I got it replaced at a reduced price from CAS, rather than return it to them. The sword is in otherwise new condition. The handle wrap will have to be repaired or replaced. I am offering it here at a reduced price for a do-it-yourself project.

 

Price SH6003SGF Musashi Shinken Katana $360

 

006-PP Erik The Red

This is an older CAS Iberia Viking sword that I have had in stock as a display item. It has a heavy leather scabbard, brass cross and pommel and a nice wide blade with a wide fuller.

Stats:

34" overall

27" blade

2 1/4" wide at the cross

25 1/2" fuller

3 lb 4 oz

Price 006-PP Viking Sword $200

 

  This is an unreleased model of a CAS Iberia/Hanwei Japanese officer's saber. There were a limited number of these sabers produced. The saber has a steel blade, real same on the handle and metal D guard and back strap. The scabbard has a wood core and black leather cover.

 

Stats are;

30 1/2" overall

Blade 25" 

 

SH2080-GT Japanese Officers Saber

Price $230

 

  I have one each of the first generation of CAS Iberia's Practical Katana and Practical Ninja swords. These are the ones with the plastic habaki; because of these feature this swords would need to be remounted or used for display.

Practical Katana  not in stock

Practical Ninja     $90

 

Home